|
| |
The 1231 provides standard features like dual-channels, 31 1/3 octave bands,
ISO frequency centers, +/- 12 dB input gain range, and switchable 40Hz/18 dB
per octave low-cut filters, 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range
for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors
for installation ease; balanced inputs and outputs for quiet operation;
and chassis/signal ground lift capabilities for quick hum isolation.
|
With a threshold range of 0 to +20dbu, the PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits.
DBX's new Type III® Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box.
|
All dbx crossovers all feature Linkwitz-Riley 24dB per octave filters.
The inputs and outputs are TRS differentially balanced 1/4" jacks.
There's a recessed 40 Hz low cut (HPF) on each channel
to remove unwanted low frequencies. Both the low and
high outputs on each channel have a gain control ranging
from - to +6 dB to allow muting of individual outputs and for level matching.
|
The DBX 4800 provides incredible flexibility, sonic excellence and intuitive control for performance applications, the DriveRack® 4800 is the new flagship of the hugely successful DriveRack family.
|
The 260 provides full bandpass and crossover configurations
as well as independent output processing and a full time RTA
for live sound applications.
|
The DriveRack 480 includes 4 inputs and 8 outputs on XLR connectors.
Each channel has EQ in the form of a 9-band parametric or a 31-band
graphic and notch filters. The 480 also features a filter set that
can be used to create a Highpass, Lowpass or Bandpass filter.
Dynamics processing is available on all channels with a Compressor/Limiter
that emulates the classic dbx 160.
The output section of the 480 offers delay, output level and phase compensation.
The 480 is also capable of running dual real-time analyzers on channels three
and four. A 480 master, a PC GUI, or a 480R remote can control the 480.
Any combination of 480s, 481s, 482s and 442s can be controlled on a single
DriveRack network consisting of up to 100 units. All features can be
controlled by the included dbx Professional Products Interactive DriveWare software.
|
The superb engineering in the 266XL ensures that both its
compression and gating provide versatility
and excellent sonic performance in situations
where other compressor/gates typically produce undesirable processing artifacts.
|
At the heart of the 1066 is our new dbx V2 VCA.
The revolutionary VCA boasts superb dynamic range characteristics
while maintaining very low distortion and almost immeasurable noise characteristics.
|
The 1046 provides 4 channels of smooth classic dbx OverEasy®
or Hard Knee compression that are perfectly suited for use
on individual tracks of your multitrack recorder, and in
virtually all applications the separate channels can be
individually interfaced and used for entirely independent purposes.
|
The POWER-Q combines the functions of nine separate products into one easy-to-use 2U package.
The 24-bit, two-channel POWER-Q contains Parametric EQ (up to 12 band per channel,
with low and high pass filters), 31-band Graphic EQ with adjustable filter widths,
full-featured Real-Time Analyzer, Compressor/Limiter, Delay, Noise Gate and 24
patented FBX Feedback Exterminator Filters (12 per channel). All functions operate concurrently.
|
|